Reduced space required, high productivity.
Able to produce sizes from 25x25x2 to 40x40x1, up to 60mm of maximum thickness.

The Semi-Automatic Press Mod. OM200-R stands out for its versatility, easy operation and low maintenance.
Equipped with automatic alternate rotation of the press table, the partial automation facilitates the work of operators and improves productivity; thanks to its various production possibilities it can be used in various fields of civil and industrial paving, both for indoors and outdoors, and offers the possibility to produce formats from 25x25x2 to 40x40x1.
The machine, controlled and tested, is delivered to the user ready for use, without the need for foundations or special constructions: connected the cables of the electric current and compressed air, it is immediately ready for production.

OMC OM200-R - 20x20x2 & 25x25x2

20x20x2 & 25x25x2

OMC OM200-R - 33x33x1 & 40x40x1

30x30x1, 33x33x1 & 40x40x1

OMC OM200-R - 40x25x1

40x25x1

OMC OM200-R - Esagono 40x1

Hexagonal 40×1

OMC OM200-R - Ottagono 40x1

Octagonal 40×1

Technical Features

Semi-Automatic Press with two stations used as follows:

  • The first station to manually distribute mortar for the first layer inside the moulds, compacting it by vibration, followed by distribution and shaving of the second layer;

  • The second station to gradually press the product in two stages: during the first stage, inert materials are progressively compacted in the moulds, in the second stage inert materials are pressed with higher pressure, at a maximum power of 145,000 Kg; this phase is followed by the ejection of the moulded tiles, which are collected by a manual extractor.

Other key features

  • Interchangeable Frames with pneumatic closing of the moulds on the rubber bottom plates with adjustable force;

  • The press is suitable to mould up to a maximum thickness of 60mm in the standard version;

  • Vibration of the vibrating plans on special anti-vibrating iron-rubber with moto-vibrator with adjustable eccentric masses, with a power of 500W (520 Kg of centrifugal force);

  • Hydraulic station equipped with a piston pump with variable flow rate, built with high quality materials;

  • Electric control panel manufactured with high-quality components and equipped with an electronic speed-change gear for the automatic alternate rotation of the press table.

The production capacity is approximately 3 cycles per minute;
The overall weight is about 4.200 Kg;
The installed power is 9,6 kW.

Compatible Products

Planetary Mixer Mod. KM270

Manual Preparation of the 1st Layer

Planetary Mixer Mod. KM270

The Planetary Mixer Mod. KM 270 performs the forced mixing of materials for the 1st Layer, ensuring maximum homogeneity of the mortar; equipped with SKIP with load capacities up to 250 Lt.

Go to product page…

Screw-Type Mixer Mod. OM2/C

Manual Preparation of the 2nd Layer

Screw-Type Mixer Mod. OM2/C

The Screw-Type Mixer Mod. OM2/C is designed for the mixing of aggregates for the 2nd layer, it is equipped with a hopper for sand, hopper for gray cement and automatic dosage of the cement and water.

Go to product page…

Drawing Conveyor Mod. OM40/F

Picking and storage of tiles

Automatic Drawing Conveyor Mod. OM40/F

The Automatic Drawing Conveyor Mod. OM40/F improves productivity by eliminating the problem of the manipulation of the fresh product and reducing labor costs.

Go to product page…